Sample question 1 · Security Fundamentals (15%)
Meridian Logistics Group, a 1,200-employee enterprise operating a distribution hub in the Midwest, is undergoing an internal security audit. The audit team's SIEM dashboard flagged a series of gratuitous ARP replies originating from a workstation on VLAN 40, overwriting ARP cache entries on neighboring hosts and redirecting traffic through the attacker's machine. The network governance committee has mandated that the security engineer document and implement a preventive Layer 2 control on the access switches before the next quarterly compliance review. DHCP snooping is already enabled and the DHCP snooping binding table is populated. The security engineer must implement Dynamic ARP Inspection (DAI) on VLAN 40 to address the ARP poisoning threat. Which statement correctly describes a prerequisite and a required configuration step for DAI to validate ARP packets effectively?
- A. DAI does not require DHCP snooping; the engineer should configure static ARP ACLs for every host on VLAN 40 and enable DAI on the VLAN without designating trusted ports.
- B. DAI requires a populated DHCP snooping binding table or configured ARP ACLs to validate IP-to-MAC bindings; the engineer must enable DAI on VLAN 40 and configure uplink ports as DAI trusted ports.
- C. DAI operates independently of the DHCP snooping binding table and validates ARP packets solely by inspecting the source MAC address against the switch MAC address table; no trusted port designation is needed.
- D. DAI must be enabled globally on the switch before it can be applied per VLAN; enabling it only on VLAN 40 without a global command will have no effect on ARP packet validation.
View answer & explanation
Correct answer: B. DAI requires a populated DHCP snooping binding table or configured ARP ACLs to validate IP-to-MAC bindings; the engineer must enable DAI on VLAN 40 and configure uplink ports as DAI trusted ports.
[Domain 5 - Security Fundamentals, Subtopic 5 - Security Fundamentals - Area 1 - Port security] Core Concept: Configure Layer 2 security features. requires applying port security in the context of the scenario, consistent with the official (ISC)² CC exam outline. Correct Answer (B): DAI requires a populated DHCP snooping binding table or configured ARP ACLs to validate IP-to-MAC bindings; the engineer must enable DAI on VLAN 40 and configure uplink ports as DAI trusted ports. Why the other options are incorrect: Option A: While static ARP ACLs can supplement DAI, stating that DHCP snooping is not required is misleading in this context; the binding table is the primary validation source, and omitting trusted port designation would cause DAI to drop legitimate ARP traffic arriving on uplinks. Option C: DAI does not use the MAC address table for ARP validation; it relies exclusively on the DHCP snooping binding table or ARP ACLs, making this description factually incorrect and operationally dangerous. Option D: Unlike some features, DAI is enabled on a per-VLAN basis using the 'ip arp inspection vlan' command and does not require a separate global enable command; this option misrepresents the correct IOS configuration syntax.